Хидраулична пумпа Nachi PVD-1B-32CP 4699382 за мини багер John Deere 35D

1. Product Identification
Component: Main Hydraulic Variable Displacement Axial Piston Pump Assembly

Manufacturer Model Number: Nachi PVD-1B-32CP (PVD Series Architecture)

John Deere OEM Part Number: 4699382

Machine Compatibility: John Deere 35D Mini Excavator

Condition: Genuine Original New / Premium OEM Specification Equivalent

2. Technical Specifications
Pump Type: Variable Displacement Axial Piston Pump with Auxiliary Gear Section

Flow & Pressure Control: Engineered to match the exact displacement, flow distribution, and working pressure thresholds required by the John Deere 3.5-ton mini excavator hydraulic system.

Drive Configuration: Heavy-duty input spline shaft designed to couple directly with the engine flywheel dampener.

Integrated Control System: Features factory-calibrated regulators to manage dual piston pump outputs and auxiliary gear flow for smooth multi-function operation.

3. Critical Installation Requirements
Hydraulic Pump Housing Priming (Mandatory)
Before starting the engine for the first time, manually pre-fill the pump casing with clean, fresh hydraulic fluid through its highest case drain port. Running an axial piston pump dry—even for a few seconds—will score the valve plate and piston slippers, causing immediate pressure failure.

Air Bleeding & Initial Startup Procedure
After installation, loosen the top air bleed port on the pump housing. Crank the engine with the fuel supply disabled until clear, bubble-free oil flows out, then re-tighten. Allow the machine to idle under no load for 10 to 15 minutes to purge remaining air from the system.

Fluid & System Decontamination
If replacing a pump that failed due to severe mechanical breakdown, completely drain and clean the hydraulic oil reservoir, flush all main feed lines, and clean the oil cooler. Always replace return and suction filter elements before running the engine.

Relief Pressure Check
Verify that system main relief pressures match factory specifications upon startup. Improper relief valve settings can cause sluggish hydraulic controls or lead to engine stalling under heavy load.

4. Frequently Asked Questions (FAQ)
Q: Is the Nachi PVD-1B-32CP a direct replacement for John Deere part number 4699382?
A: Yes. Nachi is the original equipment manufacturer (OEM) pump supplier for many John Deere compact excavator lines. Part number 4699382 cross-references directly to this Nachi PVD-1B model, ensuring identical mounting bolt patterns, shaft splines, and hose port locations.

Q: My John Deere 35D stalls the engine or loses speed when performing multiple boom and travel functions. Is the main pump failing?
A: Engine stalling or loss of multi-function speed usually indicates that internal pump wear plates have scored or that the pump load-sensing regulators are no longer adjusting properly under load. Replacing the main pump assembly restores factory flow distribution and power balance.

Q: Does the unit come complete with the gear pump section attached?
A: Yes. The unit comes fully assembled as a single integrated pump assembly, including the main axial piston pump section, factory-adjusted regulator blocks, and the auxiliary gear pump section.

5. Shipping & Logistics
Packaging: Preserved with rust-inhibiting storage oil, fitted with heavy-duty port plugs, and packed inside an export-safe protective crate or box.

Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your workshop or job site.